Phone : (+39) 02 906 39 261 Email: info@varmatec.com

beforeafter

Thermal radiation follows the laws of optics for both reflection and refraction aspects.

Infrared light is the reason we feel warm on a sunny winter day. Using the properties of radiation, the sun’s rays move through space and the air, warming objects, such as the human body, that are exposed to it. This is because the bodies that receive infrared rays from the source immediately absorb the heat and are warmed up instantly.

... and cheaper

"VARMATEC’s electric infrared heating systems use the same means of heat transmission as the rays of the sun. The heat emitted is absorbed directly by the objects, people and any structures that come into contact with it. These then turn the waves absorbed into thermal energy, which is in turn transmitted to the surrounding environment, creating optimal comfort for the occupants of the area to be heated.
For this reason, by directly heating the objects and the people, but not the surrounding air, there is no dispersion of heat, and efficient «local warming» is obtained.

VARMA TEC® high technology and innovation

energy-saving, environmentally friendly and safety oriented

With traditional hot air systems

The warm air rises upwards, forms layers and disperses through the openings: people remain in the cold with high costs.

With Varma Tec® infrared heaters

As with light, the heat is directed and maintained, without dispersion, only on areas of interest. The result is solar-quality heat, a comfortable environment without noise and dust, only for the time necessary, and with significant energy savings.

OUR SPECIAL PATENTED REFLECTORS

From decades of experience in the research and application of infrared technology

The VARMA TEC® technology

Decades of experience with infrared technology and research have allowed VARMA TEC® to develop and patent special parabolic reflectors. The shape of the reflector and the material used – a special aluminium alloy – optimise the refraction of the infrared rays
thus guaranteeing maximum heat efficiency and significant energy savings.

The concentration of the infrared rays is evenly spread, allowing for an even spread of heat, with no dispersion.
With equal energy consumption, VARMATEC electric infrared heaters guarantee 30% greater heat emission than many other heaters on the market.

Why VARMA TEC®heating is different

Varma Tec V400 Common quartz heater Gas heater
Power consumpton per hour 2000 Watt/h 2000 Watt/h 1 Kg Gas/h
Operating cost per hour 2 kW/h * 6h * 0.20 €/kWh = 2.4 €/h 2 kW/h * 6h * 0.20 €/kWh = 2.4 €/h 11 Kg. * 6h * 2.6 €/Kg. = 15.6 €/h
Heating capacity High Low Medium
Heating efficacy Immediate (90% of the power released in less than 1 second) Needs preheating for a few minutes Needs a long preheating phase
Safety High
all Varma Tec® products are tested and certified. In addition, thanks to proprietary patents, they can be used exposed to water
Variable
Depending on the certification and origin of the product
Low
risk of fire in the event of overturning and risk of explosion due to the need to store dangerous gas cylinders
CO2 emission No direct emission No direct emission Direct release of C02
Installation modes On wall, ceiling or mobile support On wall, ceiling or mobile support On mobile support
Sensitivity to wind or cold air Not very high High Very high

VARMA TEC® is ideal for heating specific areas

in your favourite places and only for as long as necessary

VARMA TEC® electric infrared heaters can be used to heat only the areas required and only for the time required, using the heat radiating properties of the infrared rays. Just like the sun, the infrared rays move through the air and heat the objects exposed to them. Heat thus remains localised only in the areas where it’s effectively required, without any dispersion.

INDOORS

VARMA TEC® electric infrared heaters are the ideal solution for buildings or large indoor areas where a conventional heating system cannot be used or would be difficult to install, or result in excessive energy costs. With VARMA TEC® electric infrared heaters, heat remains localised in the areas frequented by people, and does not disperse up towards ceilings or towards any openings. These heaters are ideal where heat is required immediately or only occasionally, or where traditional convection heating systems are insufficient, such as warehouses, work areas, changing rooms or showrooms. Because they use infrared rays and not air to transmit heat, savings of up to 70% can be obtained compared to traditional electric and gas systems.”

OUTDOORS

VARMA TEC® electric infrared heaters can be used to heat only the areas required and only for the time required, using the heat radiating properties of the infrared rays. Just like the sun, the infrared rays move through the air and heat the objects exposed to them. Heat thus remains localised only in the areas where it’s effectively required, without any dispersion.

Homes, basements, patios

Indoor and outdoor industrial work areas and workshops

Changing rooms, sports and fitness areas

Terraces and free outdoor areas

Winter garden, verande

Outdoor spaces of restaurants, hotels, pubs and bars

Historical sites, castles, ancient villas, farmhouses

Health clubs, swimming pools

Churches, sacristies, meeting rooms, offices

Showrooms, boutiques, shops, markets

Cabins, chalets and to supplement insufficient heating

Rescue areas, hospitals, garages

Golf courses, camping

Ski resorts

Under sunshades, dehors and gazebos